Dakota Digital VHX-66C-CVL-K-B 1966-67 Chevelle VHX Instruments

Fully lit needles, backlit faces, and highly visible LCD message centers are a few of the things that you can see which set the VHX Series apart from yesterday’s traditional approach to instrumentation. A few of the features which you don’t normally see are the micro-controlled precision stepper motors, solid-state sensors for unparalleled accuracy, and user-customizable display feedback, all supported by an unrivaled limited lifetime warranty which has become the standard for Dakota Digital instrumentation systems. Completely engineered and manufactured at our facility in Sioux Falls, South Dakota, the VHX Series has completely revolutionized the instrumentation industry!
Uses stock or aftermarket bezel (sold separately) Bezel part # 610088 Black Face Blue Display Features
Included Sensors Water Temperature
1/8″ NPT, ground isolated sensor with a 10 ft harness. Oil Pressure
1/8″ NPT solid state sensor with a 10 ft harness. Cable Driven Speed Sensor/Generator
Replaces GM style speedometer cables with a 10 ft harness. Sensor requires approximately 5″ clearance extending between the cable drive output and any obstruction. Bushings
Each kit comes with 1/8″ to 1/4″, 3/8″ and 1/2″ NPT bushings along with bushings for 12mm and 16mm x 1.5 threads. Analog Gauges Speedometer
0 -140 MPH Tachometer
0- 8,000 RPM Oil Pressure
0- 80 psi Water Temperature
100- 260ºF Fuel Level
E, 1/4, 1/2, 3/4, F Voltmeter
9- 17 VDC Lighting
Back lit technology is popular with performance instrumentation due to precise lighting allowing you to see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator, and digital message center is lit by a series of LEDs behind the gauge face. Digital Message Centers Standard Displays
Odometer (One-time user settable, Million Mile) Dual (A/B) Trip Meter (0- 9,999.9) Clock (12 hour) Performance Meters
0- 60 MPH Timer (0- 100 kmh) 1/4 mile time 1/4 end speed (trap speed) High-speed recall High RPM recall Built-in Indicators Indicators
Turn Signals (Left/ Right) High Beam Check Engine Parking Brake Cruise Control (On/On & Engaged when vehicle is equipped) Gear Position (Optional GSS-2000 sensor required) 4 x 4 (When vehicle is equipped) Wait to Start (When vehicle is equipped) **Not all OEM indicator lamp functions will be replaced. If additional indicators are desired within the new instrument system, consider repurposing any unused indicators to suit your application. Calibration Pushbutton
Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers.